**FREE FREIGHT ON THESE FANS TO THE CONTINENTAL USA.
Super Vacuum P8S Electric 8" NANO Confined Space Fan.
Meet the market’s smallest, most powerful confined space fan! This 8" fan is designed for confined space
ventilation challenges while delivering the highest airflow in its class. The P8AS can be used to supply clean
air to an area or can be used to exhaust fumes from a confined space.
1. Versatile: Can be used for positive or negative pressure operations;
the duct can be attached to either end.
2. 2 Carry Handles: Provides easy transport.
ELECTRIC CONFINED SPACE FAN
A Super Vac Nano P8S, 8" electric confined space fan shall be supplied. The unit
shall feature a square construction design for strength and stability. The unit shall
be designed with two (2) carrying handles on each corner for easy positioning
and rapid deployment. All components of the fan shall be 100% manufactured and
assembled in the United States.
The confined space fan shall be powered by a 1/3 Horsepower electric motor that
is Total Enclosed Air Over (TEAO) type design. The unit shall be operational with
115VAC or 230VAC systems.
The entire housing of the unit shall be constructed of weather- and corrosionresistant, high-impact polyethylene with a full aluminum liner and aluminum handles
for strength. The blade shall be constructed of Durethan BKV 25 H3.0 and rated
from -40° C to +95° C. The blade shall be precision balanced and attached to the
engine shaft for a direct-drive connection. Any fan utilizing belts, pulley, gears or
additional shafts shall not be acceptable.
The front and rear safety guards shall be designed to OSHA and U.L. Standards to
prevent accidental contact with the blade.
The unit shall be designed to accept a ventilation air duct to either the inlet or outlet
side of the fan. The unit shall be designed to be used in conjunction with either a
spiral or “L” air without any additional adapters required.
The confined space fan shall be designed with the following:
Motor Manufacturer: TEAO Electric Motor
Horsepower: 1/3 HP
Voltage: 115V, 60Hz or 230V, 50Hz
Output: 1,037 cfm
Dimensions: 11.50" high x 10.75" wide x 16" deep
(295 mm x 275 mm x 405 mm)
Weight: 20 lbs.
The confined space fan shall have a minimum five (5) year warranty. The motor shall
be warranted by the motor manufacturer for a minimum of two (2) years.
A Super Vac, standard duct for Nano shall be supplied. The duct shall be
constructed from a single-ply neoprene impregnated polyester material and
shall be supported by a continuous spring steel wire helix. The duct shall come
with a built-in carry bag that duct contracts into for easy transportation.
Material shall be rated to with stand temperatures ranging from -40 to 250 F.
The duct shall include heavy-duty vinyl wearstrip with self-adhering neoprene
backing, approximately 25-27 oz. square yard. Abrasion resistance of 18,000
cycles from H-22 wheel with 1,000 gram load (FSTM 191 Method 5306).
A Class 1 hard-drawn spring steel wire helix that conforms to ASTM 227
specifications shall be in place to support the duct.
The duct shall have produced to UL94-V-O flame retardancy specifications / MINS
540-106-1 (Mare Island Naval Shipyard) / California T-19 / NFPA 701 - Large Scale.
The duct shall weigh no more than 1 lb. per ft. of duct and have a bend radius